Eldes EKB3 Manuale di Installazione Scaricare il pdf (Pagina 133)

133

133EN

MANUAL ELDES ESIM264 V3.1

NOTE: The battery status can be monitored in real-time using ELDES Conguration Tool software.

NOTE: The system sends an SMS message to a preset User 1 as soon as the battery level runs below 5%.

32.4.5. Restoring Default Parameters

1. Remove the battery from EWD1.

2. Press and hold the RESET button.

3. Insert the battery back to EWD1.

4. Hold the RESET button until LED indicator provides several short ashes.

5. Release the RESET button.

6. Parameters restored to default.

32.5. EWK1 - Wireless Keyfob

Main EWK1 features:

• Alarm system arming & disarming;

• Panic button;

• PGM output control;

• Sound indication by built-in mini buzzer.

Keyfob EWK1 – is a wireless device intended to arm and disarm ESIM264 alarm system, to open and close the gates or to control any other de-

vice connected to the alarm system. Wireless keyfob EWK1 is compatible with ELDES wireless alarm systems, therefore user can easily bind it to

the alarm system using ELDES Conguration Tool software or sending a corresponding SMS command. EWK1 keyfob features four congurable

buttons intended to operate according to individual needs. After the button is pressed, EWK1 internal buzzer’s sound signal conrms a trans-

ferred command to ESIM264 alarm system via wireless connection. The status of the sent command can be checked by attempting to receive

the feedback signal from the alarm system. This can be performed by pressing down the same button and holding it for 3 seconds. 3 short sound

signals indicate a successfully carried out command while 1 long beep stands for failed command and feedback signal failure. By default one pair

of buttons is already congured to arm and disarm the alarm system.

The virtual zones of ESIM264 system are intended for EWK1 button cong-

uration. Please, refer to software’s ELDES Con guration Tool HELP section

for more details.

It is possible to connect up to 5 EWK1 devices to ESIM264 alarm system at

a time. The maximum wireless connection range is 150 meters (in open

areas).

NOTE: Fig. No. 65 reects the default EWK1 button conguration. All keyfob buttons are congurable according to individual needs.

32.5.1. Technical Specications

32.5.1.1. Electrical & Mechanical Characteristics

Battery Type CR2032 Lithium

Battery Voltage; Capacity 3V; 240 mAh

Quantity of Batteries 1

Battery Operation Time ~18 months*

Wireless Transmitter-Receiver Frequency 868 Mhz

Range of Operating Temperatures -20...+55ºC

Wireless Keyfob Dimensions 54 x 42 x 13 mm

Humidity

0-90% RH @ 0... +40 °C (non-condensing)

Wireless Communication Range Up to 30 meters in premises; up to 150 meters in open areas

Compatible with Alarm Systems ELDES Wireless

* The operation time depends on dierent conditions and may vary.

Optional

functionality

Optional

functionality

Arm the

system

Disarm the

system

1 2 ... 128 129 130 131 132 133 134 135 136 137 138 ... 167 168

Commenti su questo manuale

Nessun commento

Eldes EKB3 Manuale di Installazione Pagina 133

Commenti su questo manuale

Prodotti e manuali riguardandi Sistemi di controllo di accesso Eldes EKB3