Eldes EKB3 Manuale di Installazione Scaricare il pdf (Pagina 79)

79EN

MANUAL ELDES ESIM264 V3.1

23.3. Keypad Partition and Keypad Partition Switch

Keypad partition determines which system partition the keypad will operate in. To identify which partition the keypad is operating in:

• EKB2 – Refer to partition name (by default – PART0) indicated in home screen view.

• EKB3 – Refer to the location of the illuminated indicator READY on the keypad. The indicator will be illuminated under section A or B,

which represent Partition 0 and Partition 1 respectively.

The keypad must be assigned to the same partition as the user password (see 23.4. User Password Partition) in order to arm/disarm

the system by the keypad. For more details on system arming/disarming by the keypad, please refer to 12.3. EKB2 Keypad and User

Password and 12.4. EKB3 Keypad and User Password.

Set keypad partition

EKB2

Menu path:

OK → CONFIGURATION → OK → aaaa → OK → PRIMARY SETTINGS → OK → KEYPAD

PARTITION → OK → KEYPAD PARTITION → OK → KEYPAD 1... 4 → OK → PARTITION 0... 1 →

Value: aaaa – 4-digit administrator password;

EKB3

Enter parameter 51, keypad slot & partition number:

51 kk p #

Value: kk – keypad slot, range – [01... 04];p – partition number, range – [0... 1];

Example: 51062#

Cong

Tool

This operation may be carried out from the PC using the ELDES Conguration Tool software.

Keypad partition switch allows to quickly change the keypad partition. When the keypad partition is changed and when 1 minute after the

last key-stroke/key-touch expires, the system will return to the preset keypad partition. Typically, this feature is used for viewing arm/

disarm status and alarms of a dierent partition or when arming/disarming a dierent system partition by EKB2/EKB3 keypad than the

keypad is assigned to.

By default, keypad partition switch is disabled. To enable/disable this feature, please refer to the following conguration methods.

Enable keypad

partition switch

EKB2

Menu path:

OK → CONFIGURATION → OK → aaaa → OK → PRIMARY SETTINGS → OK → KEYPAD

PARTITION → OK → PARTITION SWITCH → OK → ENABLE → OK

Value: aaaa – 4-digit administrator password.

EKB3

Enter parameter 77 & parameter status value:

77 1#

Example: 771#

Cong

Tool

This operation may be carried out from the PC using the ELDES Conguration Tool software.

Disable keypad

partition switch

EKB2

Menu path:

OK → CONFIGURATION → OK → aaaa → OK → PRIMARY SETTINGS → OK → KEYPAD

PARTITION → OK → PARTITION SWITCH → OK → DISABLE → OK

Value: aaaa – 4-digit administrator password.

EKB3

Enter parameter 77 & parameter status value:

77 0 #

Example: 770#

Cong

Tool

This operation may be carried out from the PC using the ELDES Conguration Tool software.

NOTE: Keypad partition switch can only be used when the system is partitioned.

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 167 168

Commenti su questo manuale

Nessun commento

Eldes EKB3 Manuale di Installazione Pagina 79

Commenti su questo manuale

Prodotti e manuali riguardandi Sistemi di controllo di accesso Eldes EKB3