Eldes EKB3 Manuale di Installazione Pagina 161

  • Scaricare
  • Aggiungi ai miei manuali
  • Stampa
  • Pagina
    / 168
  • Indice
  • SEGNALIBRI
  • Valutato. / 5. Basato su recensioni clienti
Vedere la pagina 160
161
161EN
MANUAL ELDES ESIM264 V3.1
34.4. Updating Firmware via GPRS Connection Remotely
ATTENTION: The system will NOT send any data to monitoring station while updating the rmware remotely via GPRS network. Howev-
er, during the rmware update process, the data messages are queued up and transmitted to the monitoring station after the rmware
upgrade process is over.
Before updating the rmware remotely via GPRS connection, make sure that:
• SIM card is inserted into SIM CARD slot of Esim264 device (see 2.2. Main Unit, LED & Connector Functionality).
• Mobile internet service (GPRS) is enabled on the SIM card.
• Power supply is connected to ESIM264.
• Default SMS password is changed to a new 4-digit password (see 6. PASSWORDS).
• At least User 1 phone number is set up (see 8. USER PHONE NUMBERS).
• APN, user name and password are set up (see 30.2.1. GPRS Network).
Initiate FOTA
ESIM264 alarm system supports FOTA (rmware-over-the-air) feature. This allows to upgrade the rm-
ware remotely via GPRS connection. Once the upgrade process is initiated, the system connects to the
specied FTP server address where the rmware le is hosted and begins downloading and re-ashing
the rmware. The rmware le must be located in a folder titled Firmware. In order to initiate the upgra-
de process please , send the following SMS message.
SMS
SMS text message content:
XXXX_FOTA:ftp-server-ip,port,rmware-le-name.bin,user-name,password
Value: ssss - 4-digit SMS password; ftp-server-io - public IP address of FTP server where
EPIR rmware le is stored; port - port number of FTP server (usually - 21); rmware-le-
name.bin - name of the rmware le, allowed max. length - up to 31 character; user-name
- user name of FTP server login, allowed max. length - up to 31 character; password -
password of FTP server login, allowed max. length - up to 31 character.
Example: 1111_FOTA:84.15.143.111,21,ESIM264fw bin,eldesuser,eldespassword
ATTENTION: Comma character is NOT allowed to use in user name and rmware le name.
ATTENTION: “ELDES UAB” does not run a FTP server and does not host the rmware les online. Please, contact your local distributor to
request the latest rmware le: [email protected]
NOTE: It is strongly recommended to restore default parameters after the rmware update.
Vedere la pagina 160

Commenti su questo manuale

Nessun commento