Eldes EKB3 Manuale di Installazione Scaricare il pdf (Pagina 42)

42 EN

MANUAL ELDES ESIM264 V3.1

12.5. iButton Key

To arm or disarm the system, touch the iButton key reader by any of 5 available iButton keys (see 11. iBUTTON KEYS for iBut-

ton key management). When the iButton is touched to the iButton key reader for arming, the system will proceed as follows:

• If ready (no violated zone/tamper), the system will initiate exit delay and arm.

• If unready, the system will not arm and provide a list of violated zones/tampers by SMS text message to user phone

number. In such case the user must restore all violated zones and tampers before arming the system. Alternatively, the

violated zones can be bypassed (see 14.7. Bypassing and Activating Zones), disabled (see 14.9. Disabling and

Enabling Zones) or a Force attribute enabled (see 14.6. Zone Attributes).

The system will arm/disarm the partition corresponding to the one that the iButton key is assigned to. For more details on how

to set iButton key partition, please refer to 23.5. iButton Key Partition.

12.6. EWK1/EWK2 Wireless Keyfob

EWK1/

EWK2

To arm the system, press 1 of 4 keyfob buttons set to arm the system (by default, EWK1 – ;EWK 2 - ). When EWK1/

EWK2 button is pressed for arming, the system will proceed as follows:

• If ready (no violated zone/tamper), the system will initiate exit delay and arm.

• If unready, the system will not arm and provide a list of violated zones/tampers by SMS text message to user phone

number. In such case the user must restore all violated zones and tampers before arming the system. Alternatively, the

violated zones can be bypassed (see 14.7. Bypassing and Activating Zones), disabled (see 14.9. Disabling and

Enabling Zones) or a Force attribute enabled (see 14.6. Zone Attributes).

To disarm the system, press 1 of 4 keyfob buttons set to disarm the system (by default, EWK1 - ; EWK2 - ).

The system will arm/disarm the partition corresponding to the one that EWK1/EWK2 wireless keyfob is assigned to (see 23.6.

EWK1/ EWK2 Wireless Keyfob Partition). For example, if EWK1/EWK2 wireless keyfob is assigned to Partition 1, the user

will be able to arm/ disarm only Partition 1. To arm a dierent partition than the EWK1/EWK2 wireless keyfob is assigned to,

bind another EWK1/EWK2 keyfob to the system and assign it to a dierent partition.

For more details on how to manage EWK1/EWK2 keyfob buttons, please refer to ELDES Conguration Tool software‘s HELP

section.

Arm the

system

Disarm

the

system

Arm the

system

Disarm

the

system

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 167 168

Nessun commento

Eldes EKB3 Manuale di Installazione Pagina 42